30 Inspirational Quotes On Replacement Door Handles

How to Replace Door Handles

Door handles are a key element of your home’s decor. A new handle can bring your decor and space up to date.

As time passes, your knobs for your doors can begin to feel stiff, or break. These are signs it’s time to change them. This guide will help you pick the correct door handle replacement handles for upvc windows for your home.

Door Knobs

The handles on your doors will enhance the look of your home and make it easier to open and shut them. They are available in a wide range of colors, finishes and styles to complement your decor. If yours is beginning to show signs of wear or require an upgrade You can replace them in a few simple steps.

You must locate the shaft, visit the up coming document or spindle through which the knob is attached to the door. Some knobs have a tiny opening that you can access with an screwdriver to take out the set screws that keep the handle in place. Some have a small slot or hole through which you can use to press the spring-activated detent pin using a flathead. When you press this pin, the latch mechanism releases and lets you pull or push on the knob.

Once you have the spindle or shaft in your hand, remove the old knob and replace upvc door handle it. Align it correctly and check that the latch is working properly before tightening new set screws.

After replacing the knob, you can place the rod for the latch into the door’s hole. Interlock it with the rod system on the second knob. Make sure the holes are lined up, then thread in the screws on the latch plate and tighten them.

Some people choose a smooth or brushed metal finish for their door hardware to give their home a sleek and contemporary style. This will match their furniture. Others prefer a more rustic look that is a good match for rustic-styled rooms. If you have one of your family members with mobility issues, you may prefer an rim or lever lock that require less pressure to operate.

Other factors are being considered more and more for the design of door handles. Infection control and accessibility are two major issues that have led to the development of innovative new handle designs including ones which can be operated by a person’s forearm.


The latch that opens your door is prone to wear and tear due to age and use. Changing out the old latch to fit an entirely new handle can be an easy DIY task and will make a significant difference in the way your door opens and closes.

Depending on what kind of handle you choose, the latch could be a separate component or a part of the knob. In either case, you’ll need to follow the same process to remove and replace. The process of removing the old latch of its place is quite simple particularly if your door handle is equipped with what’s known as a “magic button”. This little pressure-slot, located on the side knob is the one you’ll need to press in order to remove the latch of the handle.

If your handle does not have this magic button the first step is to remove any cover plates that rest over the latch plate. These are usually circular or rectangular and [Redirect-302] can be removed using a screwdriver to pry them off of the handle. Some have a small slot inside that you can slide your screwdriver through, while others snap off.

The next step is to loosen the two machine screws that secure the latch and the inner plate to the door handle. You will need to store the screws that are shorter and have a pointed tip in a safe place to be able to reuse them later. After the screws have been removed, you can take the latch plate as well as the mechanism from the hole, and then set it aside.

Then you can begin to install the new latch. Place the latch plate in the door hole and secure it with the hardware supplied. Make sure that the square pin on interior of the latch is facing the latching mechanism in the handle and is aligned with the screw holes on the other sides of the handle. Then, secure the exterior latch plate using the screws provided.

Strike Plate

One of the most frequent reasons for replacing the door handle is because it feels loose or doesn’t lock properly. This is usually due to misaligned parts in the latching system, for example the strike plate being too small or has moved upwards or down on the doorjamb over time. This project allows you to replace your old strikeplate with a longer one, which will provide better security for your double glazing door handles and ensure it stays closed.

Apply a lipstick or another marking material on the bolt for the latch to check if it is the strike plate. Close the door and try to latch it. If the mark is lower than the strike plate hole it indicates that the plate is too small and the upvc door handles won’t latch. If the mark is higher than the strike plate hole, it’s likely that the strike plate has been moved upwards or downwards on the doorjamb.

Depending on the door you have You may be able to attach the new strike plate in place over the old one using the screws that come with it. But, you may have to drill holes first, and then chisel out some of the wood to make sure it’s snugly fitted. If this is the situation make sure you don’t cut too much wood or you may ruin the strength of the doorjamb.

You can also consider installing a new box strike plate which provides the lock with a more secure grip on the door and requires more force to open it. Typically it requires two long screws to secure the strike plate to the frame of the door. You’ll need remove the old strike plate before drilling and chiseling the wood to make space for the new one.

This hard-to-find strike plate is made to work with rim locks from the past, and it’s constructed of sturdy solid brass in an extremely thick. This kit includes wood screws as well as machine screws so you can choose the right hardware to suit your needs. Remember that wood screws have a pointed point, whereas machine screws are blunter.

Leave a Reply

Your email address will not be published. Required fields are marked *